Water-cooled turbine housing
Water-cooled turbine housings improve thermal management around the turbine section and help control heat under sustained operating loads.
Click image to zoom
HX80 Turbine Housing Replacement for Cummins K19-M680 M700 Marine Engines
Aftermarket HX80 turbine housing for Cummins K19-M680 M700 and related marine applications. Verify flange type and bolt pattern before ordering. Volume pricing and worldwide shipping available.
Orders without stock ship approximately 60 days after ordering. Estimated ship date if ordered today: .
US$ 388.00
/ 1 pc(s)
Qty
Subtotal: US$ 388.00
Send an InquiryProduct Key Features
This aftermarket HX80 turbine housing is a replacement component for Cummins K19-M680 M700 marine engines, designed for offshore support vessels and crew boats. It serves as an aftermarket replacement application for marine powerplants, with technical fitment support available to verify flange alignment and bolt patterns before installation.
Key Specifications
- Product Type: Turbine Housing
- Turbo Model: HX80
- Application Clue: Cummins K19-M680 M700 marine engines
- Gross Weight: 26 kg
- Packing Dimensions: 41 x 39 x 23 cm
- Material Appearance: Cast metal with matte finish and brass threaded fittings
- Visible Features: Rectangular exhaust inlet flange with four corner bolt holes; central circular opening with machined flange; ribbed structural details
- Image Availability: High-resolution studio photography available for front, top, and side views
Verify the rectangular exhaust flange dimensions and bolt hole count against your existing housing. Confirm the central opening diameter and threaded port locations match your specific turbocharger configuration before installation.
Application & Compatibility
Source application path clues for buyer verification. These are source category/application paths, not confirmed fitment claims:
- Damen > 151 × 29-ft aluminum crew-boat series for Mexican operators > 151 × 29-ft aluminum crew-boat series for Mexican operators Crew boat > Offshore support vessel > CUMMINS K19-M680 M700
- HOPE SERVICES > 72 × 30 ft pushboat design — M > V Roger Binsfeld and M > V Lisa Marie > CUMMINS K38M
- VIGOR INDUSTRIAL > EFB-08825 > San Francisco Fireboat 3 (St. Francis) > CUMMINS QSK19-M > QSK19-DM
This HX80 turbine housing is listed for reference applications including Damen 151 × 29-ft aluminum crew boats and offshore support vessels powered by Cummins K19-M680 M700 engines. Additional application clues include HOPE SERVICES 72 × 30 ft pushboats with Cummins K38M engines and VIGOR INDUSTRIAL fireboats with Cummins QSK19-M engines. These paths serve as verification clues; buyers must confirm the specific turbocharger configuration, flange type, and bolt pattern against their existing unit before ordering. Verify the rectangular exhaust inlet flange dimensions and the four corner bolt holes match your current housing. Confirm the central circular opening diameter and threaded port locations align with your engine setup to ensure proper installation.
Technical Notes
The HX80 turbine housing is a cast metal component featuring a rectangular exhaust inlet flange with four corner bolt holes and a central circular opening. Visible brass threaded fittings and ribbed structural details support heat dissipation and structural integrity. Buyers should verify the flange dimensions, bolt pattern, and port locations against their existing housing to ensure proper alignment. Confirm that the central opening diameter matches the specific turbocharger configuration before installation. This verification step helps prevent misalignment and ensures stable operation within the marine engine setup.
B2B Supply
LeadTurbo supports B2B buyers with volume pricing and worldwide shipping for this HX80 turbine housing. Technical fitment support is available to verify flange dimensions, bolt patterns, and port locations against your specific marine engine configuration. Inquire with your engine code (K19-M680 M700, K38M, or QSK19-M) and vessel application to confirm the correct replacement component. This service helps ensure the housing aligns with your existing turbocharger setup before installation.
Product FAQ
Ensure the CHRA is balanced before assembly to prevent vibration. Verify that the turbine housing flange aligns correctly with the compressor housing to maintain stable operation.
Measure the rectangular exhaust inlet flange and count the four corner bolt holes. Compare these dimensions against your existing housing or OEM specifications to ensure a proper fit.
The gross weight is 26 kg. The packing dimensions are 41 x 39 x 23 cm, suitable for standard freight shipping.
Reference applications include Damen 151x29-ft crew boats with Cummins K19-M680 M700 engines, as well as Cummins K38M and QSK19-M marine powerplants.
151 × 29-ft aluminum crew-boat series for Mexican operators and other product, brand and model names are the property of their respective owners and are used for reference and application-lookup only. LeadTurbo is not affiliated with or endorsed by 151 × 29-ft aluminum crew-boat series for Mexican operators.
Compatibility Verify part number, engine code (K19-M680 M700, K38M, QSK19-M), vessel application, and OEM reference numbers before ordering. This is a reference application; confirm fitment with your specific turbo configuration.
Customer Reviews
Share installation notes, fitment feedback, or service experience for this product.
No customer reviews have been added for this product yet.
Related technical guides
For More Information
Frequently Asked Questions
What types of turbocharger spare parts do you offer? Warranty, shipping, quality and more.
Complete Turbo Units
Complete turbo units designed for rigorous heavy-duty use where OEM units may fall short.
CHRA / Core Assemblies
Brand-new compatible CHRA cores — like-new performance at a fraction of replacement cost.
Turbine Wheels & Shafts
Precision-balanced turbine shafts engineered from inside out for superior durability.
Turbine Housings
Silicon-molybdenum (Si-Mo) nodular cast iron — engineered for extreme heat resistance.
Compressor Housings
OEM-matched geometry and surface finish — advanced casting and machining for perfect fitment.
Bearing Housings
Rock-solid platform engineered for high-output rebuilds — the foundation for performance.
Compressor Wheels
Aluminum, stainless steel, or titanium alloys — precision machined for superior responsiveness.
